Configuring Huawei Router to authenticate (also including authorization and accounting) to Tacacs+ server 10.10.10.10 – Tacacs+/ACS/ISE/AAA server#1 10.10.10.11 – Tacacs+/ACS/ISE/AAA server#2 20.20.20.2 – Loopback/source IP Configure the tacacs server profile or template hwtacacs-server template <PROFILENAME> hwtacacs-server authentication <TACACS IP#1> hwtacacs-server authentication <TACACS IP#2> secondary hwtacacs-server authorization <TACACS IP#1> hwtacacs-server authorization <TACACS IP#2> secondary hwtacacs-server accounting <TACACS IP#1> hwtacacs-server accounting <TACACS IP#2> secondary hwtacacs-server source-ip <SOURCE IP> hwtacacs-server shared-key cipher <TACACS KEY> hwtacacs-server user-name original Sample Config: hwtacacs-server template freenetworktutorials …
Tag: <span>huawei</span>
SSH Configuration Examples in Huawei Router Here are the configuration examples: whereas: 192.168.100.100 = Jumphost IP (Allowed IP to SSH into the device) Enable the SSH service stelnet server enable 2. Configure key exchange algorithm ssh server key-exchange { dh_group_exchange_sha256 dh_group_exchange_sha1 ecdh_sha2_nistp256 ecdh_sha2_nistp384 ecdh_sha2_nistp521 sm2_kep} 3. Configure encryption algorithm ssh server cipher { aes256_ctr aes128_ctr aes256_cbc aes128_cbc 3des_cbc } 4. Configure HMAC algorithm ssh server hmac { md5 | md5_96 | sha1 | sha1_96 | sha2_256 | sha2_256_96 } 5.…
In routing world, Administrative Distance refers to the reliability of the routing protocol. It is equivalent to Juniper’s Route Preference and Huawei’s Preference. It is important to consider these values as in the scenario that there are multiple routes to a destination (with same prefix length), the route (learned via the routing protocol) with the lowest value is preferred. Table below will show the values for respective platform. Routing Protocol Cisco(AD) Juniper (RP) Huawei(P) Connected Interface 0 0 0…
Here’s the Cisco IOS-XR commands vs Huawei OS commands Cisco IOS-XR Huawei BASIC show display | include | include exit quit end return ..formal | configure system-view shutdown shutdown no shutdown undo shutdown no undo clear reset show running-config display current-configuration show version display version show tech-support display diagnostic-information show configuration (after change) display configuration candidate clear counters <interface> reset counters <int> clear line <line><line number> terminal length <num> screen-length <0-512>…
One Comment