Here is a simple tutorial on tracing access users on Huawei Router. There are few ways to trace access-user based on the given information and most common are circuit-id, ip-address,ipv6-address and mac-address. [~Huawei]trace access-user object 1 ? access-mode The access mode calling-number The Calling Number ce-vlan The CE VLAN ID circuit-id User’s circuit-id interface The interface ip-address The IP address ipv6-address IPv6 address mac-address The MAC address pe-vlan The PE VLAN ID remote-id User’s remote-id tunnel-id User Tunnel ID user-name…
Tag: <span>MAC address</span>
Note: This steps are based on bridge domain/VPLS setup on Cisco ASR 9000 running Cisco IOS-XR. For normal routed interfaces, you can find it using the command: show arp <interface> Scenario 1: IP address is given, find which interface it is connected IP address: 192.168.15.6 a. Find the routing entry for the IP to know where it is connected show route <IP> RP/0/RSP1/CPU0:ASR9K#show route 192.168.15.6 Routing entry for 192.168.15.0/29 Known via “connected”, distance 0, metric 0 (connected) Installed May 16…
Leave a Comment