Scenario:2 physical interfaces bundled together (port-channel) and associated in the same vlan. Tested in:Cisco NexusJuniper EX Series Steps Cisco Juniper Configure 2 physical interfaces interface Ethernet1/1description Server Link#1switchportswitchport access vlan 888channel-group 99 mode activeno shutdown interface Ethernet2/1description Server Link#2switchportswitchport access vlan 888channel-group 99 mode activeno shutdown #set interfaces xe-0/0/0 description ” Server Link#1 “#set interfaces xe-0/0/0 gigether-options 802.3ad ae99 #set interfaces xe-1/0/0 description ” Server Link#2 “#set interfaces xe-1/0/0 gigether-options 802.3ad ae99 Configure the port-channel interface port-channel99description Server Port-channelswitchportswitchport access…
Tag: <span>aggregated-ether-options</span>
This is a sample steps of migrating IP configuration from physical interface to bundle interface. Take note that this may result service impact during the migration as the existing interface need to be shutdown and re-configure. Remember to shift your traffic prior with the maintenance. Existing Config: freenetwork@MX1-re0> show configuration interfaces et-0/0/1 description “Link to Switch1”; unit 0 { family inet { address 192.168.0.1/24; } family inet6 { address fdf8:d3f5:1a47:bc09::1/64; } Fig.1 Shutdown the physical interface and remove existing configuration…
Leave a Comment