Tag: <span>access</span>

Scenario:2 physical interfaces bundled together (port-channel) and associated in the same vlan. Tested in:Cisco NexusJuniper EX Series Steps Cisco Juniper Configure 2 physical interfaces interface Ethernet1/1description Server Link#1switchportswitchport access vlan 888channel-group 99 mode activeno shutdown interface Ethernet2/1description Server Link#2switchportswitchport access vlan 888channel-group 99 mode activeno shutdown #set interfaces xe-0/0/0 description ” Server Link#1 “#set interfaces xe-0/0/0 gigether-options 802.3ad ae99 #set interfaces xe-1/0/0 description ” Server Link#2 “#set interfaces xe-1/0/0 gigether-options 802.3ad ae99 Configure the port-channel interface port-channel99description Server Port-channelswitchportswitchport access…

Cisco Juniper

Dynamic Host Configuration Protocol, or DHCP, is a network protocol used (via DHCP server) to dynamically or automatically assign IP address and other info (e.g.Gateway,DNS) to each hosts in the network. Here’s a sample configuration of running DHCP server in a Layer 3 switch. Host Setup: Gateway: 192.168.10.1 Netmask: 255.255.255.0 DNS Server: 192.168.20.254, 8.8.8.8 Layer 3 Switch(tested in Cisco 49xx) VLAN ID: 888 IP Block: 192.168.10.0/24   Fig.A. Hosts connected to switch Configure respective interfaces for access vlan L3-Switch#conf t…

Cisco