Here’s the basic BGP (eBGP) configuration of connecting 3 different router vendors namely Huawei, Juniper and Cisco Routers. Assuming we connect via their physical interfaces and incoming and outgoing policies are basically allow all. Sample Configuration Huawei <Huawei>system-view Enter system view, return user view with return command. [~Huawei] interface GigabitEthernet1/0/0 description Connection to Cisco ip address 192.168.0.1 255.255.255.252 interface GigabitEthernet1/0/1 description Connection to Juniper ip address 192.168.1.1 255.255.255.252 xpl route-filter Cisco-Import approve end-filter xpl route-filter Cisco-Export approve end-filter xpl route-filter…
Tag: <span>ebgp</span>
Here is sample tutorial on how to configure External Border Gateway Protocol (EBGP) between Huawei Router and another router. I will focus on the configuration of the Huawei router (RouterA). Fig.1.1 Procedure: 1. Configure the Loopback IP address a. Enter system view command: system-view <RouterA>system-view Enter system view, return user view with return command. <RouterA>interface LoopBack0 <RouterA>description RouterA Loopback0 <RouterA>ip address 172.16.1.1 255.255.255.255 <RouterA>quit Verify: <RouterA>display current-configuration interface LoopBack 0 2. Configure the P2P(point to point) IP, we will assume…
Leave a Comment